Basic Operating Commands - GE Allegro User Manual

Basic operating commands

Figure 2 below shows the panel keypad and Table 4 below describes the system's
basic commands.
Figure 2: Panel touchpad
Table 4: Basic system commands
Task
Check system status
Disarm the system
Arms doors and windows
Arm doors and windows, no delay
Arm motions, doors and windows
Arm motions, doors and windows, no delay
Arm system silently
Turn chime feature on and off (only when system
is unarmed)
Identify open sensor, trouble conditions, and
alarms in memory
Bypass a zone
Quick exit (for use when system is armed)
Police panic
Fire panic
8
Arm
1 1 2 2
Disarm No Delay
4 4 5 5
Silent Chime Options
7 7 8 8
Quick Exit Status
*
0 0
Back
Command
Press Status (*)
Press Disarm + code
Press Arm + code
Press Arm + code + No Delay (4)
Press Arm (twice) + code
Press Arm (twice) + code + No Delay
Press Silent + Arm + code
Press Chime (7)
Press Status (*)
Press Bypass (#) + primary code
Press Quick Exit (starts a two-minute timer for use
of one entry/exit door)
Press and hold both the Arm and 1 buttons until
the panel indicates the alarm
Press and hold both the Silent and Chime (7)
buttons until the panel indicates the alarm
3 3
6 6
9 9
Bypass
#
Select
Allegro Control Panel User Manual