Check After Installing - Mitsubishi Electric BR-LM1KK Quick Start Manual

4 C h e c k a f t e
4 C h e c k a f t e
Check in according with the following checklist after installing.
Be sure to take measures if there is any fault. (Performance is not only be exhibited, but safety can not be ensured.)
- Is the strength of the wall enough?
- Are the intakes, exhaust slots and ventilation holes blocked?
- Do the circumference surface of the display touch adjacent panels?
- Are the bolts tightened securely?
Hook
Base Bracket
Display Bracket
Bolts for fixing Display Bracket
Handle
- Are the cables slacken off sufficiently not to pull them when the
display is opened?
- Do the cables run off the panel edge when the panel is closed?
- Are the handles adjusted to contact the claw with the bezel front
surface?
r i n s t a l l i n g
r i n s t a l l i n g
Item
2pcs
4pcs
L/R each 2pcs
L/R each 1pcs
L/R each 2pcs
Measures in case of a fault
Reinforce the wall.
Eliminate any objects blocking.
Attach Bracket (L) and (R) correctly.
Adjust panel gap
Tighten the bolts.
Slacken off the cables sufficienty.
Tie the cables with cable ties.
Adjust the position of the handles.
Check
□
□
□
□
□
□
□
□
EN-11