Preparation - Mitsubishi Electric BR-LM1KK Quick Start Manual

2 P r e p a r a t
2 P r e p a r a t
Tools
Prepare the following tools..
Necessary tools
Hex keys (4mm, 5mm)
Phillips screwdriver (#2)
Wrench (8mm)
Level
Stepladder
Bolt (M6 length over 50m)
The name of each part
Handle (L)
Display
bracket (L)
Handle (R)
Bolt
(6 pcs)
 Do not block the ventilation holes. The temperature inside
the display rises high causing a fire or breakdown.
 Exhaust hot air gets stacked above the display. Create a
space around the displays so as to release it and flow
enough fresh air in from the bottom at least as shown
below. It should apply to the case of portrait orientation as
well. (unit: mm).
EN-4
i o n
i o n
Base bracket
Display
bracket (R)
Hook
Washer
(4 pcs)
Hole locations on the wall
1 Create following mount holes on the wall. (unit: mm)
 Create the holes fixing the cable ties to clamp the cables
suitably.
Landscape
[LM55S1/P1]
2-M6 for Hook
4-M6 for Base bracket
[LM46P1]
2-M6 for Hook
4-M6 for Base bracket