AP400 features
•
Antenna
Standard: internal omni-directional antenna
•
Call handling
Crystal clear speech
•
CLIP and name display
features
•
Enquiry
•
Conferencing
•
Seamless integration with features of PBX
platform
•
Capacity
Channels: 12 channels providing max. 11 simultaneous calls per AP400
•
Maximum number of DECT Access Points is 750
•
Maximum number of extensions is 18750 (this number is restricted by the maximum number of extensions
supported by the host PBX system)
•
Design
Very compact unit (less than A5 size) with flexible antenna positioning
•
Housing
Indoor use: mounting on wall or under ceiling
•
Localisation
Supported frequency bands: EMEA, US, Latin America, Thailand
•
AP400 is available for EMEA, US and Canada, Latin America, Australia and specific Far East markets
support
•
A dedicated AP400 configuration is available for Cruise Line ships that need the frequency band to be switched
from EMEA to North American band (based on GPS position)
•
Management
DAP Manager runs on a standard Windows PC, can run in parallel with other applications
•
DAP Manager is not required for daily use, unless support of wide area roaming or messaging is required
•
Messaging
Messaging (LRMS) support
•
Maximum message length support: 160
characters
•
Menu
Easy menu programming
•
Messaging
Messaging (LRMS) support
•
Message waiting (voicemail)
•
Support of different urgencies/priorities: Normal,
urgent and emergency
•
Mobility/other
Supports DECT compatible handsets
•
Roaming and seamless handover
•
Multi-site
AP400 can be used in main and branch offices
•
support (main
AP400s in a DECT location are part of the same
and branch
multi-cast group in the LAN
offices)
•
For use in WAN no multi-cast is required
•
Network
Connects directly to Local Area Network
aspects
Ethernet
•
Multicast
•
Power supply
Power over Ethernet (PoE) according to 802.3af
•
Security
Secure DECT authentication on all channels
•
Service/
Software upgrading via air interface
•
maintenance
Software upgrading of handsets via air interface
•
SIP protocol
AP400 supports SIP protocol (See also the SIP Protocol Support table)
•
support
The AP400 adds DECT mobility to a SIP enabled PBX (See also the paragraph on PBX platform compatibility)
•
Signalling
Synchronisation requires 1 channel
•
User interface
Web access (via DAP Manager)
1) Features depend on the capabilities of the PBX and IP DECT system.
2) EMEA DECT frequency band is supported in most Asian markets as well.
3) The maximum number of characters depends on the PBX platform and application used for messaging.
4) See DECT handset datasheets for support of software upgrading through the air.
5) CAT-iq features are enabled by specific R6 versions.
1)
3)
4)
IP DECT AP400 series
•
Optional: external antenna (only on AP400E)
•
Central Directory support
•
DTMF and call progress tones
•
Overlap Sending
•
Multiple call Appearance (2nd call)
•
Optional: weather proof outdoor housing
2)
•
Message broadcast support
•
Message waiting indication
•
Message broadcast support
•
Set-up of voice call to call back number in message
•
Full non-blind slot radio
•
Location detection
1)
•
DAP manager is required for wide area roaming
•
Branch and main offices form one combined DECT
system
•
10/100 Mbits Ethernet interface
•
Support of G.711 and G.722 for CAT-iq
•
Support of G.729AB compression (with G7A add-on board)
•
Software upgrading via headset connector (2.5 mm)
•
LED status indicator
4)
•
Directly from DAP Manager application PC
1)
1)
5)