Download Print this page

External Antenna - NEC AP400 series Features

On-site wireless telephony on your ip network, ip dect
Hide thumbs Also See for AP400 series:

Advertisement

Dimensions
Dimensions
146x174x43 mm (wxhxd) including antenna part
mounted horizontally) (in case the antenna part is
mounted vertically 146x147x69 mm)
Weight
302 gram (AP400E 306 gram)
ABS/polycarbonate
Protection
Handset: IP20
Range
Indoor: 50 m max
Outdoor: 300 m max
Power
Power over Ethernet (PoE): 36-57 V over spare wire
supply
pairs and phantom feed: IEEE802.3af (Class 2)
Colour and
Housing: white (RAL9010), antenna part light grey
finishing
(RAL7035)
Network
10/100BASE-T IEEE802.3
Connector
8-pin RJ45
Cable
Cat. 5 or CAT 6 UTP
IP version
4, DHCP, TFTP
QoS
IEEE802.1Q, 802.1p
DiffServ
Yes
Audio
G.711
algorithms
G.729AB (AP400 and AP400E: plus G7A
board)
Full non-
According to EN301406
blind slot
DECT RF
part
RF output
10mW average per channel at antenna connection
6)
Sensitivity
Typical -90 dBm measured at antenna connection
at BER=0.001
Antenna
Dual omni-directional internal antennas
Frequency
EMEA: 1880 – 1900 MHz
bands
Thailand: 1900 – 1906 MHz
Latin America: 1910 – 1930 MHz
North America: 1920 – 1930 MHz
10 carrier frequencies (or less, depending on
country regulations)
Typical
Indoor: 20 – 50 m
range
Outdoor: 300 m
5) The radio coverage of DECT equipment depends on the
environment and presence of obstacles.
6) For specific countries, such as Egypt, the maximum number
of channels is 6 channels per base.
AP400 package content
AP400 model

External Antenna

External Directional
Antennas
5)
5)
5)
5)
Mounting material
AP400E for external,
directional antennas
IP DECT AP400 series
Outdoor box
Dimensions
291x241x88 mm (wxhxd)
Weight
1.23 kg (inclusive radio & 8dBi antenna
and antenna cables)
Protection
Handset: IP20
Material
Polycarbonate
Colour
Grey (RAL 7035)
Mounting of
outdoor box
Operating with
outdoor box
Relative humidity
5 to 95%
Hermetically closed
IP66
Outdoor box
IEC 62208, UL 508 A, IEC 62262: IK08,
NEMA 4.4X: IP66
Industrial use
IEC 439-4
DAP Manager platform
PC Operating
System/browser
Required PC hardware
PBX platform compatibility
Compatible with all NEC communication platforms: UNIVERGE
SL-series, SV8100, SV8300, SV8500.
SIP compatibility has been tested with various 3rd party PBX
systems, such as with Mitel 3300, Cisco CUCM R6.1/R8.x)
and Alcatel Lucent Omni PCX Enterprise R9.x (ask your local
representative for detailed information).
Base stations are installed inside
as a complete unit
Wall mounting material included
-20°C to +45°C (class 3.2)
No additional heating required
UV radiation resistant
Windows 2003 Server SP2
or higher
Windows 2008 SP2
Windows 2008 R2
Windows XP Professional
SP2 or higher
Windows 7 (Professional,
Enterprise and Ultimate)
Browser: Internet Explorer
6.0 or higher
CPU: Minimum 2.4 GHz
RAM: Minimum 1 Gb

Advertisement

loading

This manual is also suitable for:

Ap400eAp400c