Advertisement
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
command timeout for Target #.#
The Target #,# command did not terminate after the specified time elapsed. The SCSI/SAS unit and cable may have a fault.
Contact customer support.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
timeout on EventAck message interrupt
The EventAck message timed out. Contact customer support.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
IOC is in fault status. doorbell = #
The SCSI/SAS control chip is faulty. When indicated by repetition, Contact customer support.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
Reset History did not clear
The SCSI/SAS control chip history could not be cleared. Contact customer support.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
Target # disabled wide SCSI mode
Wide SCSI transfer of the target# was invalidated. Contact customer support.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
Target # reverting to async. Mode
The target# is transferred asynchronously. Contact customer support.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
Target # reducing sync. transfer rate
The synchronous transfer rate of the target# has been reduced. Contact customer support.
WARNING: /pci@#,#/FJSV,(e)ulsa@# (fjulsa#):
Auto Request Sense emulation failed
Auto Request Sense failed because of the settings of the upper driver.
Contact customer support.
Advertisement
