Ink Adheres To The Recording Surface; The Product Does Not Function; All Lights Are Off; Lights Came On And Then Went Out - Epson PP-100 User Manual

Hide thumbs Also See for PP-100:

Table of Contents

❏ If you print continuously for an extended period, the disc may temporarily stop feeding

or the printing may pause for a while. This is to slow down the printing speed and

prevent the product mechanism from overheating and being damaged. If this happens,

you can continue to print, but we recommend stopping and leaving the product for about

thirty minutes with the power on. (The product does not recover with the power off.)

After you restart, the product will print at normal speed.

❏ Uninstall the printer driver, then reinstall it.

& See "Uninstalling Software" on page 17.

Ink adheres to the recording surface

❏ Depending on the type of disc, ink may adhere to the recording surfaces if they are

stacked right after printing. Make sure of the type of disc before using.

❏ Keep the printing surface of the disc away from other discs until ink of the printed disc

is completely dry, otherwise marks or smudges may be left at contact area.

❏ Press the P power button to make sure the product is on.

❏ Turn off the product, and make sure that the power cord is securely plugged in.

❏ Make sure that your outlet works and is not controlled by a wall switch or timer.

The product's voltage may not match the outlet rating. Turn off the product and unplug it

immediately. Then check the label on the back of the product.

Caution:

If the voltage does not match, DO NOT PLUG YOUR PRODUCT BACK IN. Contact your

dealer.

Troubleshooting

Table of Contents