Motorola A630 Motomanual page 14

Gsm wireless phone
Hide thumbs Also See for A630:
Table of Contents

Advertisement

battery as described below. Some batteries perform best
after several full charge/discharge cycles.
1 Plug the travel
2 Plug the other end of the travel charger into the
3 When your phone indicates Charge Complete, press
Note: Upon insertion of the charger plug into the handset,
the handset will respond with an indication that the battery
is charging (battery icon flashing and/or battery tone). If
the battery has been deeply discharged or stored in a
discharged state for an extended period of time, there may
be a delay of up to 10 seconds before the battery icon and/
or battery tone is activated. This is normal operations and
does not indicate a fault.
Tip: You can safely leave the travel charger connected to
the phone after charging is complete. This will not damage
the battery.
12
Action
charger into your
phone with the
release tab
facing up. Be
sure to insert the
plug's connector
hooks straight
into the phone's
charger slots, so that both hooks engage to lock
the plug in place.
appropriate electrical outlet.
the release tab and remove the travel charger.
Release
Tab

Advertisement

Table of Contents
loading

Table of Contents