Page 3
electrolux 3 Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable.
4 electrolux Contents For the User Important safety information ................5 Operation ......................7 Using the hob correctly ..................8 Cleaning and Maintenance ................9 Service and original spare parts ............... 20 European guarantee ..................21 For the Installer Technical data ....................10 Installation .......................
electrolux 5 English Important safety information This warnings has been given for the safety of you and others. We therefore ask you to carefully read the procedures of installing and using this cooker. Installation contact with it and keep them far The work of installation must be "...
Page 6
6 electrolux • Ensure a good ventilation around the Environmental Information appliance. A poor air supply could After installation, please dispose of " cause lack of oxygen. the packaging with due regard to • Ensure that the gas supply complies safety and the environment.
electrolux 7 Operation Hob burner control knobs Do not keep the control knob The symbols on the knobs mean: pressed for more than 15 se- conds. = no gas supply If the burner does not light even after 15 seconds, release = maximum gas supply the control knob, turn it the "off"...
8 electrolux Using the hob correctly Practical hints The burners ensure maximum burner efficiency, you should only use pots and pans with a flat bottom fitting the size of the burner used. Rapid Burner diameter 18-26 cm Auxiliary Burner diameter 8-16 cm •...
electrolux 9 Cleaning and Mainteinance Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. This appliance cannot be cleaned with steam or with a steam cleaning machine.
10 electrolux Should the hob top become heavily " The Ignition electrode soiled, the following products are The electric ignition is obtained recommended: through a ceramic electrode with a - For stainless steel hobs use a metal electrode. Keep these proprietary stainless steel cleaner.
electrolux 11 Gas burners NORMAL NORMAL REDUCED POWER POWER POWER BURNER NATURAL GAS LIQUID GAS G20 (2H) - 20 mbar (Butane/Propane) 30 mbar inj. inj. G30 G31 100/mm 100/mm Auxiliary burner 0,33 0,095 Rapid burner (natural gas) 0,75 0,286 liquid gas By-pass diameters Burner Ø...
12 electrolux Installation The following instructions about " installation and maintenance must be carried out by qualified personnel in compliance with the regulation in force. The appliance must be electrically " disconnected before interventions. If any electric supply to the appliance is required to carry out the work, ensure all the necessary precautions...
Page 13
electrolux 13 IMPORTANT - To ensure a correct operation, a savingof energy and the long life of the appliance, the voltage Natural gas pressure of the appliance must correspond to the recommended values. The adjustable connection is fixed to the comprehensive ramp by means of a threaded nut G 1/2".
14 electrolux Adaptation to different types of gas ! ! ! ! ! A. Injectors replacement • Remove the pan supports. • Remove the burner's caps and crowns. • With a socket spanner 7 unscrew and remove the injectors (Fig. 1), and replace them with the ones required for the type of gas in use (see table «Gas burners»...
electrolux 15 Electrical connection The appliance is designed to be connected to 230 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force. Before the appliance is connected: 1) check that the main fuse and the domestic installation can support the load (see the rating label);...
Page 16
16 electrolux Remplacement of the voltage cable The connection of the voltage cable to the appliance's terminal block is of type "Y". This means that replacement requires the specific equipment of a technician. In this case, only cable type H05V2V2-F T90 must Neutral be used.
electrolux 17 Building In Fig. 5 A = Auxiliary burner Dimensions given R = Rapid burner millimeters These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in Fig. 5. The edge of the cut out must have a minimum distance from the rear wall of 55 mm.
Page 18
18 electrolux Carry out the building in of the hob as follows: 1. Put relevant sealings, supplied with the hob, on the edges of the cut out, taking care that the sealings meet without overlapping; 2. place the hob in the cut out, taking care of its centring;...
electrolux 19 Possibilities for insertion Kitchen unit with door Proper arrangements must be taken in designing the forniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig.
20 electrolux Service and original spare parts This machine, before leaving the factory, has been tested and studied by many experts and specialists, in order to give you the best results. Any repair work which needs to be carried out should be done with the utmost care and attention.
electrolux 21 European guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of the countries listed below the appliance guarantee will move with you subject to the following qualifications: •...