Advertisement
Windows NT
Requirements
Workstation
• HP Vectra with Microsoft Windows NT Workstation 3.51 installed.
Version 3.51
• IBM AUTO LANStreamer PCI Drivers diskettes Ver. 3.04
• Driver Name: OEMSETUP.inf Size: 67KB Date: 10/18/96
• Microsoft Windows NT Workstation 3.51 and Service Pack Media.
• Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/
Device Configuration
• I/O Base Address
• Interrupt Request Level
Procedure
1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
2 Insert the IBM LANStreamer TR drivers disk 1 of 6 (AUTO LANStreamer
3 After the machine boots, verify that the adapter finished testing and that
4 Click on "F3" to exit, and then press "CTRL+ALT+DEL."
5 After windows loads, open the "MAIN" program group , and double-click
6 Select the "Network" icon in the "Control Panel" program group.
7 Click on "YES" in the "Network Settings" dialog box, and NT Networking
8 Insert the Windows NT Workstaion CD.
9 In the "Windows NT Setup" enter the path to your NT files, and click on
10 Click on the "Do Not Detect" button from the "Network Adapter Card
IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
adapter card into a PCI slot.
PCI Diagnostic Disk) and power on the machine.
the adapter is "OK."
on "Control Panel" Icon.
will be installed on your computer.
the "Continue" button. (If you have an HP preloaded HDD, set path to
"C:\I386")
Detection" dialog box, and click on "Continue" in the second "Network
Adapter Card Detection" dialog box.
4 Connecting to a Windows NT Server 4.0
Windows NT Workstation Version 3.51
FC00h
9
Advertisement
