Advertisement
1 Connecting to a Netware 3.12 Server
Windows for
Requirements
Workgroups
• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.
• IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.01.
• Driver Name: IBMMPC.DOS Size: 59KB Date: 5/22/95
• Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and
• Netware client for DOS and MS-Windows.
Device Configuration
• Interrupt
• I/O Address
Procedure
1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
2 Insert the IBM LANStreamer TR drivers disk 1 of 6 (AUTO LANStreamer
3 After the machine boots, verify that the adapter finished testing and that
4 Click on "F3" to exit, and then press "CTRL+ALT+DEL."
5 Boot the machine to a DOS prompt, and Netware client for DOS and MS-
6 Execute INSTALL.EXE and set lines 1-5 as listed below;
• C:\NWCLIENT
• YES
• YES
• NO
NWLink NetBIOS transfer protocols.
adapter card into a PCI slot.
PCI Diagnostic Disk) and power on the machine.
the adapter is "OK."
Windows disk 1.
C:\WINDOWS
1 Connecting to a Netware 3.12 Server
Windows for Workgroups
9 (2)
FCC0-h
Advertisement
