Appendix; General Specifications - Yamaha MG20XU Owner's Manual

Appendix

General Specifications

0 dBu = 0.775 Vrms, Output impedance of signal generator (Rs) = 150 Ω
All level controls are nominal if not specified.
Input channels
Output channels
Bus
Input Channel
Function
Level Meter
Built-in Effect
(XU Models only)
USB Audio
(XU Models only)
Phantom Power Voltage
Power Requirements
Power Consumption
Dimensions (W × H × D)
Net Weight
Included Accessory
Optional Accessory
Operating Temperature
For other specifications, see the included "Technical Specifications."
*1 Noise is measured with A-weighting filter.
*2 Crosstalk is measured with 1 kHz band pass filter.
Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change or mod-
ify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale,
please check with your Yamaha dealer.
European Models
Inrush Current based on EN 55103-1:2009
3.0 A (on initial switch-on)
2.0 A (after a supply interruption of 5s)
Conforms to Environments: E1, E2, E3 and E4
32
MG20XU/MG20/MG16XU/MG16/MG12XU/MG12 Owner's Manual
MG12XU
MG12
Mono: MIC/LINE 4
Mono/Stereo: MIC/LINE 2
Stereo: LINE 2
STEREO OUT 2
MONITOR OUT 1
PHONES 1
AUX SEND 2
GROUP OUT 2
STEREO 1
GROUP 2
AUX 2 (MG12XU: incl. FX)
PAD 26 dB
HPF 80 Hz, 12 dB/oct (Mono/Stereo: MIC only)
COMP 1 knob compressor (Gain/Threshold/Ratio)
Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB
Attack time: approx. 25 msec, Release time: approx. 300 msec
EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
MID:
Gain: +15 dB/-15 dB
Frequency: 2.5 kHz
LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED LED turns on when post EQ signal reaches 3 dB below clipping (+17 dBu)
Pre Monitor LEVEL 2 × 12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]
SPX Algorithm 24 programs, PARAMETER control: 1, FOOT SW: 1 (FX RTN CH on/off)
2 IN / 2 OUT USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit
+48 V
AC 100 – 240 V, 50 / 60 Hz
22 W
308 mm × 118 mm × 422 mm
(9.6" × 2.8" × 11.6")
MG12XU: 4.2 kg (9.3 lbs.)
MG12:
Owner's Manual, Technical Specifications, Cubase AI Download Information (XU model only)
Rack-mount kit (MG20XU, MG20, MG16XU, MG16 only)
Rack-mount kit: RK-MG12 (for MG12XU, MG12), Foot Switch: FC-5
0 to + 40°C
MG16XU
MG16
8
2
2
4
4
1
4
4 (MG16XU: incl. FX)
MID:
Gain: +15 dB/-15 dB
Frequency: Mono 250 Hz – 5 kHz peaking
peaking
30 W
444 mm × 130 mm × 500 mm
(17.5" × 5.1" × 19.7")
MG16XU: 6.8 kg (15.0 lbs.)
4.0 kg (8.8 lbs.) MG16: 6.6 kg (14.6 lbs.)
MG20XU
MG20
12
4
0
4
4
1
4
4 (MG20XU: incl. FX)
Stereo 2.5 kHz peaking
36 W
444 mm × 130 mm × 500 mm
(17.5" × 5.1" × 19.7")
MG20XU: 7.1 kg (15.7 lbs.)
MG20: 6.9 kg (15.2 lbs.)