Starting A Warm Engine; Shifting - Yamaha DT125R Owner's Manual

OPERATION AND IMPORTANT RIDING POINTS
4. Turn the starter (choke) on and
completely close the throttle.
(See page 3-10
(choke) operation.)
5. Start the engine by pushing the
kickstarter lever down.
6. After starting the engine, move
the starter (choke) lever back
halfway.
cC
For maximum engine life, never
5
accelerate hard when the engine is
cold!
7. When the engine is warm, turn
the starter (choke) off.
NOTE:
The engine is warm when it responds
normally to the throttle with the starter
(choke) turned off.

Starting a warm engine

Follow the same procedure as for
for starter
starting a cold engine with the excep-
tion that the starter (choke) is not
required when the engine is warm.
ECA00045
EAU01258
1. Shift pedal
N. Neutral position

Shifting

Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing
hills, etc.
The gear positions are shown in the
illustration.
NOTE:
To shift the transmission into the neu-
tral position, press the shift pedal
down repeatedly until it reaches the
end of its travel, and then slightly
raise it.
5-2
6
1
5
4
3
2
N
1
EAU00423