Replacing A Turn Signal Light Bulb - Yamaha DT125R Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
a
a. Do not touch this area.
w
Headlight bulbs get very hot.
Therefore, keep flammable prod-
6
ucts away from a lit headlight bulb,
and do not touch the bulb until it
has cooled down.
5. Place a new bulb into position,
and then secure it with the bulb
holder.
6. Install the bulb cover, and then
connect the coupler.
7. Install the headlight unit by
installing the bolts.
8. Install the cowling.
9. Have a Yamaha dealer adjust
the headlight beam if necessary.
EW000119
1. Screw
2. Lens
3. Bulb
Replacing a turn signal light
bulb
6-37
3
2
1. Remove the turn signal light lens
by removing the screw.
2. Remove the defective bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
1
EAU03497