Environment Concerns - AEG BY9004000 User Manual

36

Environment concerns

Problem
The oven does not heat
up
The display shows F11
The oven lamp does not
operate
The turn spit does not
rotate
The display shows an er-
ror code that is not in
this list
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
ENVIRONMENT CONCERNS
The symbol
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.
Packaging material
The packaging material is environmentally-friendly and recyclable. Plastic parts are marked
with international abbreviations such as PE, PS, etc. Dispose of the packaging material in
the containers provided for this purpose at your local waste management facility.
The fuse in the fuse box is released Check the fuse.
The meat probe plug is not cor-
rectly installed into the meat
probe socket
The oven lamp is defective
The turn spit is not correctly in-
stalled into the turnspit hole
There is an electronic fault
on the product or on its packaging indicates that this product may not be
Possible cause Remedy
If the fuse is released more than
one time, contact a qualified elec-
trician
Install the meat probe plug as far
as possible
Refer to "Replacing the oven
lamp"
Refer to "Turn spit"
• Switch off the appliance with
the house fuse or the safety
switch in the fuse box and
switch it on again
• If the display shows the error
code again, refer to the Cus-
tomer Care Department
.........................................
.........................................
.........................................