Clock Functions - AEG BY9004000 User Manual

14

Clock Functions

Heat-up indicator
When you activate an oven function, the bar on the display comes on. The bar shows that
the temperature increases.
Residual heat indicator
When you deactivate the appliance, the display shows the residual heat. You can use the
heat to keep the food warm.
CLOCK FUNCTIONS
Clock functions
Symbol
You can use Duration and End Time at the same time, if you want to automatically activate
and deactivate the appliance on a given time later.
If you set the time for a clock function, the time starts to count down after 5 seconds.
If you use the clock functions Duration and End Time , the appliance deactivates the heat-
ing elements after 90 % of the set time. The appliance uses the residual heat to continue
the cooking process until the time ends (3-20 minutes).
Setting the clock functions
1. Set an oven function and temperature (necessary for Duration and End ).
2. Press
the related symbol.
3. Use shuttle to set the necessary time. PressOK to confirm.
After 90 % of the set time, an acoustic signal sounds. The appliance deactivates. The
display shows a message.
4. Press a sensor field or open the door to stop the signal.
With Duration and End Time the appliance deactivates automatically.
When you use Meat Probe, Duration and End Time do not work.
Extra Time
The Extra Time makes the oven function continue after the set time ends.
Function
To set a countdown (max 2 hours 30 minutes). This function has
no effect on the operation of the appliance. You can also acti-
Minute Minder
vate it in off state. Use shuttle to set the minutes and OK to
start.
To set how long the appliance has to be in operation (max. 23 h
Duration
59 min).
To set the switch-off time for an oven function (max. 23 h 59
End Time
min).
again and again until the display shows the necessary clock function and
Description