Removing The Shipping Screw - Epson EXPRESSION 1640XL User Manual

Removing the shipping screw

To prevent damage during shipping, a shipping screw is attached
to the Transparency Unit. Remove this screw before you attempt
to use the Transparency Unit.
1. Turn the unit so the glass side faces up.
2. Remove both shipping screws as shown below.
3. Secure the screws you just removed in the storage holes
towards the center of the scanner, as shown below.
?
Caution:
If either screw is left in an outer hole while using the
Transparency Unit, the unit may be damaged.
6
6-3
Options