Installing the IEEE 1394 Scanner I/F Card in your
scanner
To use your scanner as an IEEE 1394 device, you need to install
the optional IEEE 1394 Scanner I/F Card.
1. Turn off the scanner. Unplug any power cords, then
disconnect all cables from the back panel of your scanner.
2. Use a cross-head screwdriver to remove the two screws
securing the shield plate to the optional interface slot; then
remove the plate. Be sure to keep both screws; you may need
to use them again if you re-install the shield plate.
M
6-36
Options
Caution:
Static electricity can damage electronic components.
Discharge static electricity by touching the metal frame of
your scanner before handling the interface board.