Removing The Rc25 Rack Mount Kits - Fujitsu RC25 User Manual

8-2-2. Removing the RC25 Rack Mount Kits

(1) Loosen the finger screws on the right and left front ends, and then remove the slide fixing
brackets.
(2) Remove the RC25 Rack Mount Kits. Push the fixing springs to unlock the RC25 Rack
Mount Kits, and then pull them out backwards.
RC25 Rack Mount Kits
Fixing
spring
(3) Unlock the intermediate member locks of the slide rails () and store the intermediate
members in the outer members.
 Lift the tilted lock.
(4) Remove the spring locks on the rear
side of the RC25 Rack Mount Kits.
Slide fixing bracket
for transport
Removing the RC25 Rack Mount Kits
Intermediate member
lock
 Push the intermediate
member.
Outer member
Intermediate member



6
Rack Console
Finger screws
Intermediate member
Retainer
Spring lock


