Connecting And Removing Cables; Connecting Cables; Removing Cables - Fujitsu FD-1000AT User Manual

Connecting and Removing Cables

CAUTION

Connecting Cables

1. Unplug the power cords, from the power outlets, of all the equipment that is
effected.
2. Connect the keyboard cable, mouse cable and the monitor cable to their respective
pieces of equipment.
3. Plug the power cable into the Console Drawer.
4. Plug the power cable into a grounded power outlet.

Removing Cables

Unplug the power cords, from the power outlets, of all the equipment that are effected,
then remove each cable.
1 2
Read the Console Drawer manual before connecting the cables.
Do not connect or remove the cables during a thunderstorm.
When unplugging cables hold them by the plug, not the cable.
Connect and remove cables in the following order.
Connecting cables to Console Drawer diagram