Table of Contents
Advertisement
Using a Linux Operating System
CAUTION
Precautions when using the Caldera OpenLinux Server 3.1.1
Installation Precautions
When using Caldera OpenLinux Server 3.1.1 with this unit, immediately after
installation X Windows may fail at startup with the following message:
INIT : rc.gui : /opt/kde2/bin/kdm or X11 startup problem !
For X11, try running 'kxconfig' as root ...
INIT : Switching to runlevel:3
INIT : Sending processes the TERM signal press <return> to continue.
Follow the procedure listed below to reinstall X Windows so that it will start normally.
●
Startup the system using the installation CD, then select the installation mode
listed below to begin the installation.
- Standard install mode
●
Select " Programmable up to (MHz):" as the mode clock on the " Select Video
Card " screen.
●
The values that should be set for the " Select Video Card " screen are as follows:
Resolution
1024 x 768
(When all items except the resolution show " Not available ", set the resolution to
"1024 x 768")
Carefully read the cautions on page 16 to correctly set and use
the Console Drawer with a Linux operating system.
Refresh
Depth
70 Hz
8-32 bpp
Horiz. Sync
Mode Clock
56.5 KHz
75 MHz
2 1
Advertisement
Table of Contents
