Table of Contents
Advertisement
The Hot-key and Reset Buttons
Hot-key Button
Outputs the [Ctrl] + [Alt] + [Shift] key Make/Break code. This will also be the Hot-key
mode (OSD display) when connected to a KVM switch.
Reset Button
Resets the keyboard and mouse.
KVM switch, keyboard and mouse will be reset if connected to a FS-10XX Series
KVM switch.
CAUTION
Using CRT/KB Switcher
Even if the settings are the same, the image position may be different when using
various types of CRT controllers when setting up multiple servers. Generally
resolution and refresh rate (vertical frequency) are the same for all servers, therefore
just a set of one type of parameters supports these settings, which are stored for the
screen. Displays on other servers are effected by correcting an on-screen image that
has shifted.
To correct shifted displays, change the following settings.
1. Set the refresh rate of servers that have displays with incorrect images to a different
value.
2. Select the best screen display and the save it.
As multiple refresh rates for resolution can generally be set, you can use multiple
options for the screens.
KVM Switch Reset is only valid with the following series: FS-1004,
1008, and 1016.
2 3
Advertisement
Table of Contents
