Part 3 - Quick Configuration Of The Internet Security Router; Buttons Used In Setup Wizard; Setting Up The Internet Security Router; Figure 3.2. Login Screen - Asus Internet Security Router User Manual

Chapter 3. Quick Start Guide
Part 3 — Quick Configuration of the Internet Security Router
3.3
In Part 3, you log into the Configuration Manager on the Internet Security Router and configure basic settings
for your Internet connection. Your ISP should provide you with the necessary information to complete this step.
Note the intent here is to quickly get the Internet Security Router up and running, instructions are concise. You
may refer to corresponding chapters for more details.
3.3.1

Buttons Used in Setup Wizard

The Internet Security Router provides a preinstalled software program called Configuration Manager that
enables you to configure the Internet Security Router via your Web browser. The settings that you are most
likely to need to change before using the device are grouped onto sequence of Configuration pages guided by
Setup Wizard. The following table shows the buttons that you'll encounter in Setup Wizard.
Button
3.3.2

Setting Up the Internet Security Router

Follow these instructions to setup the Internet Security Router:
1. Before accessing the Configuration Manager in the Internet Security Router, make sure that the
HTTP proxy setting is disabled in your browser. In IE, click "Tools" è "Internet Options..." è
"Connections" tab è "LAN settings..." and then uncheck "Use proxy server for your LAN ..."
2. On any PC connected to one of the four LAN ports on the Internet Security Router, open your
Web browser, and type the following URL in the address/location box, and press <Enter>:
This is the predefined IP address for the LAN port on the Internet Security Router.
A login screen displays, as shown in Figure 3.2.
If you have problem connecting to the Internet Security Router, you may want to check if your PC is
configured to accept IP address assignment from the Internet Security Router. Another method is to
set the IP address of your PC to any IP address in the 192.168.1.0 network, such as 192.168.1.2.
14
Click this button to save the information and proceed to the next
configuration page.
Click this button to go back to the previous configuration page.
http://192.168.1.1

Figure 3.2. Login Screen

Internet Security Router User's Manual
Function