Specifications - Panasonic PT-FW430EA Specifications

Specifications

Model PT-FW430EA
Power supply 100 – 240 V AC, 3.9 –1.4 A, 50/60 Hz
Power consumption 330 W (0.4 W at 220 –240 V AC, 0.3 W at 100 –120 V AC when standby mode set to eco*
9 W when standby mode set to normal, 20 W when standby mode set to normal and audio monitor out.)
18.9 mm (0.74 inches) diagonal ( 16:10 aspect ratio )
LCD panel Panel size
Display method Transparent LCD panel (× 3, R/G/B)
Pixels 1,024,000 (1,280 × 800) × 3, total of 3,072,000 pixels
Pixel configuration Stripe
Lens Manual 2× zoom (throw ratio: 1.34 – 2.68:1),
manual focus F 1.7 – 2.6, f 21.6 – 43.0 mm
Lamp 250 W UHM lamp (The lamp replacement cycle is 6,000 hours. *
Screen size (diagonal) 0.84 –7.62 m (33 – 300 inches), 16:10 aspect ratio
3
Brightness* 3,500 lm (lamp mode: normal)
3
Centre-to-corner uniformity* 80%
3
Contrast* 600:1 (full on/full off)
Resolution 1,280 × 800 pixels (Input signals that exceed this
resolution will be converted to 1,280 × 800 pixels.)
Scanning HDMI/DVI-I (digital) f : 27.0 kHz – 68.7 kHz; f
H
frequency DVI-I (analogue)/RGB f : 15 .6 kHz – 91.1 kHz; f
H
YP P (YC C )
f : 15.75 kHz; f
B R B R
H
f : 31.50 kHz; f
H
f : 15.63 kHz; f
H
f : 31.25 kHz; f
H
f : 37.50 kHz; f
H
f : 45.00 kHz; f
H
Video/S-Video f : 15.75 kHz; f
H
Optical axis shift Vertical ±51% from centre of screen (manual)
Horizontal ±24% from centre of screen (manual)
Keystone correction range Vertical: ±30°
Installation Ceiling/desk, front/rear
Built-in speaker Output power: 5.0 W (monaural)
Terminals HDMI IN HDMI 19-pin × 1 (Deep Colour, compatible with HDCP)
DVI-I IN DVI-I 29-pin × 1
Digital: (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
Analogue: (RGB/YP
COMPUTER (RGB) IN D-sub HD 15-pin (female) × 1 (RGB/YP
VIDEO IN RCA pin × 1 (composite video)
S-VIDEO IN Mini DIN 4-pin × 1 (S-Video)
AUDIO IN 1 M3 × 1 (L, R × 1), 0.5 Vrms
AUDIO IN 2 M3 × 1 (L, R × 1), 0.5 Vrms
AUDIO IN 3 RCA pin × 2 (L, R × 1), 0.5 Vrms
AUDIO OUT M3 × 1 (L, R × 1) (monitor out: 0 – 2.0 Vrms, variable)
SERIAL IN D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
LAN RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
WIRELESS MODULE Connector for optional wireless module ET-WM200E × 1
Cabinet materials Moulded plastic (PC+ABS)
Dimensions (W × H × D) 430 × 125.5*
Weight Approximately 6.0 kg (13.2 lbs.)
Operating environment Operating temperature: 0°C – 40°C (32°F– 104°F)*
Supplied accessories Power cord, wireless remote control unit, batteries (R6 type × 2), software CD-ROM (Logo Transfer
Software, Multi Projector Monitoring & Control Software Ver. 2.5, Wireless Manager ME 5.5)
* 1 When the standby mode is set to eco, network functions such as power on over the
LAN will not operate. Also, only certain commands can be received for external control
using the serial terminal.
* 2 This value is calculated by continuously turning the lamp on for 2 hours and off for
0.25 hours. The lamp replacement cycle will decrease if the lamp is turned on/off
more frequently, or if it is left on for longer intervals.
N O T E S O N U S E
1. Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or
extended use.
3. The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 500 mm (19-11/16 in) or more around the projector's intake and exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection.
When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one
projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must be between 0°C (32°F) and 40°C (104°F). Also, make sure
the projector's intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake.
4. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
5. Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an indication of faulty lamp performance.
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. Product availability
differs depending on region and country. This product may be subject to export control regulations. The projection distances and throw ratios
given in this brochure are for use only as guidelines. For more detailed information, please consult the dealer from whom you are purchasing
the product. Also, the throw ratios shown are the values for an 80-inch image size (measured diagonally). The throw ratio varies depending
on the diagonal image size. The PJLink trademark is an application trademark in Japan, the United States, and other countries and regions
or registered trademarks. All other trademarks are the property of their respective trademark owners. Projection images simulated.
© 2011 Panasonic Corporation. All rights reserved.
: 24 .0 Hz – 85.0 Hz; dot clock: 25 .2 MHz– 148.5 MHz
V
: 24 .0 Hz – 85.1 Hz; dot clock: 162 MHz or lower
V
: 60 Hz (480i [525i])
V
: 60 Hz (480p [525p])
V
: 50 Hz (576i [625i])
V
: 50 Hz (576p [625p])
V
: 50 Hz (720 [750]/50p)
V
: 60 Hz (720 [750]/60p)
V
: 60 Hz (NTSC/NTSC4.43/PAL-M/PAL60), f
V
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/60p, 1080/50p,
VGA (640 × 480) – WSXGA + (1,680 × 1,050), compatible with non-interlaced signals only;
dot clock: 25.2 –146.25 MHz;
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/60p, 1080/50p,
VGA (640 × 480) – WSXGA + (1,680 × 1,050), compatible with non-interlaced signals only;
dot clock: 25.2 –146.25 MHz;
P (YC C ))
B R B R
P × 1)
B R
4
× 323 mm (16-15/16˝ × 4-15/16˝ *
* 3 Measurement, measuring conditions and method of notation all comply with ISO
21118 international standards.
* 4 With legs at shortest position.
* 5 The operating temperature range is 0°C to 35°C (32°F to 95°F) when used in High-
Altitude mode (1,400 m to 2,700 m (4,593 ft to 8,858 ft)).
PT-FX400EA
1
,
20.3 mm (0.8 inches) diagonal ( 4:3 aspect ratio )
Transparent LCD panel (× 3, R/G/B)
786,432 (1,024 × 768) × 3, total of 2,359,296 pixels
Stripe
Manual 2× zoom (throw ratio: 1.48 –2.96:1),
manual focus F 1.7– 2.6, f 24.0 – 47.2 mm
2
)
0.84 –7.62 m (33 – 300 inches), 4:3 aspect ratio
4,000 lm (lamp mode: normal)
1,024 × 768 pixels (Input signals that exceed this
resolution will be converted to 1,024 × 768 pixels.)
f : 33.75 kHz; f : 60 Hz (1080 [1125]/60i)
H V
f : 28.13 kHz; f : 50 Hz (1080 [1125]/50i)
H V
f : 27.00 kHz; f : 24 Hz (1080 [1125]/24p)
H V
f : 33.75 kHz; f : 30 Hz (1080 [1125]/30p)
H V
f : 67.50 kHz; f : 60 Hz (1080 [1125]/60p)
H V
f : 56.25 kHz, f : 50 Hz (1080 [1125]/50p)
H V
: 15.63 kHz; f : 50 Hz (PAL/PAL-N/SECAM)
H V
±50% from centre of screen (manual)
±27% from centre of screen (manual)
4
× 12-23/32˝ ) (Protruding parts not included)
5
; operating humidity: 20%–80% (no condensation)
Dimensions
4 3 0 (16 -15 / 16 )
Projection Distance
PT-FW430EA (16:10 aspect ratio; throw ratio: 1.34–2.68:1)
Projection size Projection distance
(diagonal)
Min Max
(wide) (telephoto)
0.84 m – 1.8
33˝ (–) (6.0)
1.02 m 1.1 2.3
40˝ (3.6) (7.4)
2.03 m 2.3 4.6
80˝ (7.4) (14.9)
3.05 m 3.4 6.9
120˝ (11.2) (22.5)
5.08 m 5.7 11.5
200˝ (18.8) (37.6)
7.62 m 8.6 17.2
(28.3) (56.5)
300˝
PT-FX400EA (4:3 aspect ratio; throw ratio: 1.48–2.96:1)
Projection size Projection distance
(diagonal)
Min Max
PT-FW430 - E (16:10)
(wide) (telephoto)
0.84 m – 1.9
33˝ (–) (6.4)
1.02 m 1.2 2.4
40˝ (3.8) (7.8)
2.03 m 2.4 4.8
80˝ (7.8) (15.7)
3.05 m 3.6 7.2
120˝ (11.9) (23.6)
5.08 m 6.1 12.0
200˝ (19.9) (39.5)
7.62 m 9.1 18.1
300˝ (29.9) (59.3)
Optional Accessories
PT-FX400 - E (4:3)
ET-PKF110H
Ceiling mount
bracket for
high ceilings
ET-WM200E ET-EMF100
Wireless module Replacement
filter unit
Freeware
Multi Projector
Monitoring and
Control Software
Ver. 2.5
For more information about Panasonic projectors
http://panasonic.net/avc/projector
JQA-QMA14392 EC98J2010
Factories of Business Solutions Business Group have received ISO
14001:2004—the Environmental Management System certification
(except for third parties' peripherals).
All information included here is valid as of July 2011.
PT-FW430EA2 Printed in Japan.
unit: millimetres (inches)
3 2 3 ( 12-2 3 / 3 2 )
unit: metres (feet)
Height from edge
of screen to centre
of lens
0 – 0.45
(0 – 1.5)
0 – 0.54
(0 – 1.8)
-0.01 – 1.09
(0 – 3.6)
-0.02 – 1.63
(-0.1 – 5.3)
– 2.73
-0.03
(-0.1 – 8.9)
-0.05 – 4.09
(-0.2 – 13.4)
Height from edge
of screen to centre
of lens
0 – 0.50
(0 – 1.7)
0 – 0.61
(0 – 2.0)
0 – 1.22
(0 – 4.0)
0 – 1.83
– 6.0)
(0
0 – 3.05
(0 – 10.0)
0 – 4.57
(0 – 15.0)
ET-PKF110S
Ceiling mount bracket
for low ceilings
ET-LAF100A
Replacement
lamp unit
051