Lights - Epson All in One Printer User Manual

User's Guide

Lights

Lights Function
Stays on while the product is connected to a network. Flashes while network settings are being
adjusted.
On when the product is on.
P
Flashes when the product is receiving data, printing/copying/scanning, charging ink, or cleaning the
print head.
On when the product is out of paper, or when multiple sheets of paper are fed at the same time. Load
b
paper in the rear paper feed correctly and press x r or r x.
Flashes when the paper is jammed. Remove the jammed paper from the rear paper feed, load paper
correctly, and press x r or r x.
On when the ink level may have reached the lower line. Fill all ink tanks with ink and clear the error.
B
&
Flashes when the ink level may be low. You may continue printing. However, prepare new ink bottles
soon. Epson recommends the use of genuine Epson ink bottles.
&
To confirm the actual ink remaining, visually check the ink levels in the product's ink tanks. Continued
use of the product when the ink level is below the lower line on the tank could damage the product.
Getting to Know Your Product
"Refilling the Ink Tanks" on page 61
"Ink Bottles" on page 98
16