Transporting The Product - Epson All in One Printer User Manual

User's Guide
c
Important:
❏ Be careful to keep water away from the electronic components.
❏ Do not spray the inside of the product with lubricants.
❏ Unsuitable oils can damage the mechanism. Contact your dealer or a qualified service person if lubrication is
needed.
A
Make sure that no warnings or errors are indicated in the control panel.
B
Load several sheets of A4-size plain paper.
C
Press one of the r buttons to make a copy without placing a document on the scanner glass.
D
Repeat step 3 until the paper is not smeared with ink.

Transporting the Product

If you move the product some distance, you need to prepare it for transportation in its original box or one of a similar
size.
c
Important:
❏ When storing or transporting the product, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏ When storing or transporting an ink bottle after removing its seal, do not tilt the bottle and do not subject it to
impacts or temperature changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely. Be
sure to keep the ink bottle upright when tightening the cap, and take measures to prevent ink from leaking when
you transport the bottle.
A
Plug in the product and turn it on. Wait until the print head returns to the home position, then close the scanner
unit.
B
Turn off the product and unplug its power cord.
C
Disconnect the interface cable from the product.
D
Remove all paper from the rear paper feed.
Maintaining Your Product and Software
71