Kenmore 415.16505900 Use And Care Manual page 14

Upper and lower Front Panel and Top brace
3
Lay front legs down on the floor. Fit upper front panel between legs. Attach with 2'' hinge pins and hitch pins through the
3rd hole down from the top of the leg, and the bottom hole of the top front panel.
Attach lower front panel with #10-24x2'' machine screws and #10-24 flange nuts through the 2 lowest holes on the legs.
Attach top brace with #10-24x2'' machine screws and #10-24 flange nuts through the 2 bottom holes of the upper leg.
#10-24
Hitch Pin
Flange Nut
Qty. 2
Qty. 8
#10-24x2"
2'' Hinge Pin
Machine Screw
Qty.2
Qty.8
Back Brace to Cart
4
Remove previously attached screws and nuts securing the upper leg and side brace as noted below. Attach upper and lower back
braces with #10-24x1-1/4" screws and #10-24 flange nuts.
#10-24x1-1/4''
Machine Screw
Qty.7
(One re-used)
#10-24
Flange Nut
Qty. 7
(One re-used)
14 • 464722309 • 464722509
Right leg
assembly
#10-24x2"
Machine Screw
Hitch Pin
Lower Front Panel
Side Brace
#10-24
Flange Nut
assembly
Top brace
Upper front panel
Back Brace
Back Brace
Left leg
Hitch Pin
2'' Hinge Pin
#10-24x2"
Machine Screw
Note:
Remove previously installed
screw and nut from location
shown to attach upper back brace.
#10-24x1-1/4''
Machine Screw