Table of Contents
Advertisement
Item
Sense Up
ExDR Mode
ExDR level
Function & Setting
This function is used to increase the sensitivity by extend-
ing the exposure time. Increasing this value slows the shut-
ter speed and motion may appear unnatural.
When the item "SHUTTER" is set to "1/250" or more, the
SENSE UP item does not work.
Setting values: OFF, x2, x4, x8, x16, x24, x32
• When SENSE UP is activated, the picture may become
rough and whitish, and subject to white blemishes.
• When the setting of the "SENSE UP" function is not OFF,
flicker may appear on the screen under fluorescent light
or mercury lamps. This is due to the principles of the
SENSE UP, and is not a malfunction.
• There may be cases where flicker can not be reduced
even under the following conditions: 1) Shutter speed is
set at 1/100 in areas where the commercial electric cur-
rent frequency is 60 Hz. 2) The shutter speed is set at 1/
60 in areas where the commercial electric current fre-
quency is 50 Hz.
The ExDR function synthesizes pictures captured at a shut-
ter speed of 1/100 and those captured at higher shutter
speeds to help monitor objects having large differences
in brightness levels.
When the "SHUTTER" function is set to "1/250" or a higher,
this function does not work.
OFF : Turns the ExDR function off.
ON : Turns the ExDR function on.
• When the ExDR function is on, flicker may appear on the
screen under fluorescent light or mercury lamps. This is
due to the principles of the ExDR, and is not a malfunc-
tion.
• There may be cases where flicker cannot be reduced
even under the following conditions: 1) Shutter speed is
set at 1/100 in areas where the commercial electric cur-
rent frequency is 60 Hz. 2) The shutter speed is set at 1/
60 in areas where the commercial electric current fre-
quency is 50 Hz.
This function sets which section of the object is to be dis-
played in the easiest-toview
brightness level in the ExDR mode.
Initial Value
OFF
OFF
0
57
Advertisement
Table of Contents
