Table of Contents
Advertisement
DVG-2016S/2032S User's Manual
3-6 Telephony Settings
Enable: Enable a line; if some lines are not used, disable them (Pause Function) to avoid unnecessary
waiting when an incoming call is diverting to this line.
Hotline Functions
FXS port: When the user picks up the phone, the gateway automatically dials your assigned hotline
number. When in hotline mode, other phone numbers cannot be dialed.
Hot Line No.: Enter the hot line number for an automatic dialing function.
Warm Line: When the Warm Line function is in use, user can dial a number. Otherwise the system will
divert incoming calls from an outside line to the Hot Line Number after a set wait time.
Example:
Assume that the assigned hotline for DVG-2016S/2032S line 1 is 701 and the Warm Line (Hot Line
Delay) is five seconds. If no extension number is dialed within five seconds, the call will be
automatically diverted to the assigned hotline (ext. 701). The system allows users to record a voice
prompt (e.g. "please enter an extension number or wait for the operator to connect you") to use in this
situation.
Assume that the assigned hotline for DVG-2016S/2032 line 2 is 702 and the wait time is 0 seconds.
When Port 2 receives a call from an outside line, it will be automatically diverted to extension 702.
FXS Group: Select group hunting when there is an incoming call and the gateway will automatically
assign an unassigned call according to the Hunting Priority. If Line 2 does not want to be set as an
assigned line to receive any inbound calls, the function can be disabled. Users can also use the Up or
Down key to adjust hunting priority.
D-Link Systems, Inc.
Telephony Settings
18
Advertisement
Table of Contents
