Table of Contents
Advertisement
DVG-2016S/2032S User's Manual
3-9 Advanced Options
NOTE: There are two operating levels when entering the Web UI. Logging-in as the Administrator
allows you to change all settings. A Web UI user only has access to some settings.
Administrator's Name and Password: Enter the administrator name and password, which has the
highest level of control of the gateway.
Web UI Login ID and Web UI/IVR Password: Enter log-in ID and password when you log-in to the
Web interface/IVR of the gateway as a normal user.
Web UI auto logout: If a user does not act within the effective time range when logging into the web
interface, the user will be disconnected from the web page to allow others to log-in.
Dial Wait Timeout: Use this variable to set the wait time for the user's first key pressing when dialing a
number. The user will hear a busy tone if he or she does not press the first key within the set time
frame.
Inter Digits Timeout: Set the waiting time between each key press. The numbers input up to that
point will be dialed after the timeout.
Minimum DTMF ON Length (Dial on)/ Minimum DTMF OFF Length (Dial off - between tones):
Used to set the dial tone when a call is being diverted to another extension.
DTMF Detection Sensitivity: Used to adjust the sensitivity of the telephone keys.
FXS Impedance: Choose the correct impedance in your country or area.
Enable Out-of-Band DTMF: To send DTMF keys (0~9, *, #,) follow the RFC2833 rules or via SIP Info.
D-Link Systems, Inc.
Advanced Options
28
Advertisement
Table of Contents
