Haier 42EP25SAT Owner's Manual page 10

Install the Speakers
1
Face the PDP screen upside down on a clean blanket or a bracket and pay attention not to indent the casing. (See figure),
lay the two speaker aside of the PDP.
2
Insert the pothook to the faucet of the PDP screen .
3
Fix the speaker to the PDP with the screws 4-ST 4X16 .
Before turning on the PDP , ensure you have connected the line between the speaker and the PDP
Connect the speaker to the speaker terminal of plasma screen:
Press the speaker terminal and insert the connecting cable into the terminal slot.
Release the speaker terminal and ensure that the white connecting cable is inserted in the terminal slot marked red and black connecting
cable is inserted in the black terminal slot, and that anode and cathode poles are correctly connected. (See Figure )
10 PLASMA TV
(42EP25 AT/42HP25 AT/ B
\U+2592\U+255A\U+2514\U+00B2 25.400
The left speaker The right speaker
B 42EP25SAT/42HP25SAT
\U+2592\U+255A\U+2514\U+00B2 25.400
EXT SPEAKER
L R
)