Pickup; Forwarding - NEC D-Term IP-32 User Manual

TO SAVE A SPEED DIAL USING THE SHIFT KEY
Press the Feature key. Press the Shift key, then press the speed dial key you wish to program.
Enter the number or function you wish to save. The display will indicate the digits dialed. Press
the Feature key again to save the number or function.
TO VERIFY YOUR SAVED SPEED DIALS
Press the Feature key. Press the desired speed dial key. Your display will indicate the number
and/or function programmed.
TO PLACE A CALL USING A SPEED DIAL KEY
Lift your handset or press the Speaker key to receive a dial tone. Press the desired speed dial
key to automatically begin dialing.

Pickup

The Pickup key on your phone allows you to answer calls in your Call Pickup Group. A Call
Pickup Group may include up to twenty numbers, but you may only be in one Call Pickup Group
at a time. This is not a standard feature and must be requested separately.
TO ANSWER A CALL FROM A CALL PICKUP GROUP
Lift your handset and press the Pickup key. The call will automatically be answered from your
phone.
Note: You may also answer a call from a Call Pickup Group by dialing #8.

Forwarding

You may send your calls to another extension, phone number, pager, or voicemail by using the
forwarding function. Fwd NA will forward your calls to another destination after three rings.
Fwd All will forward your calls immediately to another destination without ringing your phone.
Fwd Busy will forward your calls to another destination if your line is in a busy state.
Note: Different forwarding functions may be active at the same time, but each forwarding
function must be set separately. In other words, while the Fwd NA and Fwd Busy lights may be
lit up at the same time, you cannot set the Fwd NA and Fwd Busy in the same call. You must
hang up after each attempt.
TO SET FORWARDING
Lift your handset or press the Speaker key. Press the forward key you wish to set (Fwd NA, Fwd
All, or Fwd Busy), dial the desired number, and hang up. The LED will light up and your display
will indicate "Forward Set."
Note: If you have more than one line on your phone, the LED will only light up to indicate the
forwarding settings on your prime line.
9