Keys And Lamps - NEC D-Term IP-32 User Manual

Keys and Lamps

LED
Security Button
Call Waiting Lamp
LCD Display
Exit
Soft Keys
Help
Feature Keys
Speed Dial Keys
Recall
Feature
Answer
Mic
Some of the keys listed below have a built-in Light Emitting Diode (LED)
that lights or flashes according to the activity of that function key.
Locks your phone so you cannot make or receive calls. The Security Lock
LED will remain illuminated when this feature has been activated.
This light will flash when you have an incoming call. The lamp remains
steadily lit when you have a voicemail message waiting.
Liquid Crystal Diode (LCD) display provides D-Term activity information
plus date, time, and Soft Key operation.
To exit from the Menu or Help mode and go back to the time display.
Any feature shown at the bottom of the LCD display is available. Press
>>> for more features.
Explanations of the Soft Keys can be pulled up on the LCD by pressing this
key.
Your phones lines, as well as various other phone features, are located on
these keys.
These keys allow you to program frequently-used phone numbers and
functions into the D-Term's memory. You can then dial the numbers or
engage the features by pressing a single key.
Allows you to hang up a call and immediately get a dial tone.
Used to program Speed Dial Keys. Also used to activate/deactivate
Answer mode (below).
Allows you to automatically answer calls on your secondary lines. The LED
light on this key remains illuminated when this feature has been
activated.
Turns the microphone on and off. The LED light on this key remains
illuminated when the Mic is on.
2