One-Touch Speed Calling Keys - NEC UNIVERGE SV9300 User Manual

3.
When party has answered, lift the
handset.
Speaker key lamp goes off. →
0:00:05
11:00 AM SUN 1 JUN 2014
MIC Mute
ONE-TOUCH SPEED
CALLING KEYS
This feature allows a terminal user to dial
frequently-called numbers by pressing a
One-touch key assigned for Station Speed
Dialing.
Up to 32 digits can be registered for
each dial number.
The feature key is set by system data
setting at initial installation. For details,
please contact the system
administrator.
TO PROGRAM
Following explains how to register phone number
to a One-touch Speed Calling key.
1.
Press Feature key.
Feature key lamp lights red. →
2.
Press One-touch Speed Calling key.
Feature key lamp flashes red. →
Speaker key lamp lights red. →
3.
Dial a desired number.
81XXXXXXXXXX
11:00 AM SUN 1 JUN 2014
Recall PICK
4.
Press Feature key.
26-255XX
>>>>
66
FEATURE OPERATION
Feature key lamp goes off. →
Speaker key lamp goes off. →
SET
11:00 AM SUN 1 JUN 2014
MIC DIR
If you dial a wrong number, you will
need to start again from the beginning.
To register a pause, press
between any digits. The pause can not
be registered as a first digit.
When a phone number has been
already registered in One-touch key,
that number is displayed on the LCD.
The previous number will be cleared
when you register a new number.
TO VERIFY
Following explains how to confirm the registered
number in the One-touch Speed Calling key.
1.
Press Feature key.
Feature key lamp lights red. →
2.
Press a desired One-touch Speed
Calling key.
Feature key lamp flashes red. →
Speaker key lamp lights red. →
00:81XXXXXXXXXX
11:00 AM SUN 1 JUN 2014
Recall PICK
3.
Press Speaker key.
Feature key lamp goes off. →
Speaker key lamp goes off. →
HIST. >>>>
>>>>