Appendix E To Set Bca Option Unit; To Enable/Disable Auto Connection - NEC UNIVERGE SV9300 User Manual

APPENDIX E TO SET BCA OPTION UNIT

This section explains how to set BCA option unit. (Bluetooth Connection Adapter)

TO ENABLE/DISABLE AUTO CONNECTION

Auto Connection is the function to connect the terminal with smart device through Bluetooth using BCA
option unit. The connection is initiated with predetermined interval by BCA option unit. And the
connection will be made if you place the smart device that has been connected last through Bluetooth
near the terminal. (Effective range of Bluetooth radio interface is within 10 meter from the terminal
approximately.)
1.
Press key to display the Menu Screen.
2.
Select "setting".
Highlight an item by using,
3.
Select " User Setting".
Select one of the following operations.
 Highlight an item by using
 Press
.
4.
Select " Peripherals".
Select one of the following operations.
 Highlight an item by using
 Press
.
APPENDIX E TO SET BCA OPTION UNIT
, and press .
, and press ,
, and press ,
129
or Soft key (OK).
or Soft key (OK).