NEC UNIVERGE SV9300 User Manual page 72

INITIATE TRANSFER (BY EX. 200)
1.
Call in progress.
Line key lamp lights green. →
2.
Press Transfer key.
You will receive a special dial tone.
Calling party is placed on hold.
0:00:05
11:00 AM SUN 1 JUN 2014
MIC Mute
3.
Dial the destination extension
number.
You will receive a dial tone.
The dialed extension number is displayed
with flash.
11:00 AM SUN 1 JUN 2014
Recall VOICE
4.
Destination extension answers
transferred call.
 After the answer, announce the call is
transferred.
11:00 AM SUN 1 JUN 2014
S&R PICK
5.
Replace the handset.
Line key lamp goes off. →
A call is transferred.
ANSWER TO A TRANSFERRED CALL (BY
EX. 210)
1.
Ringing is heard.
Call Indicator Lamp flashes.
Line key lamp flashes red. →
The extension number that initiates call
transfer is displayed on the LCD.
26-255XX
210
>>>>
>>>>
64
FEATURE OPERATION
11:00 AM SUN 1 JUN 2014
R-TONE MIC
2.
Lift the handset to start a
conversation with the extension
(200).
Call Indicator Lamp goes off.
Line key lamp lights green. →
3.
Start conversation with transferred
party.
 Extension (200) replaces the handset.
0:00:05
11:00 AM SUN 1 JUN 2014
MIC Mute
TO TRANSFER A CALL
(WITHOUT
ANNOUNCEMENT)
After dialing the transfer destination number, it is
possible to replace a handset before answering
the destination party. When the transfer
destination party lifts the handset, it is
automatically connected with transferred party.
The phone number of transferred party is
displayed on the destination terminal.
INITIATE TRANSFER (BY EX. 200)
1.
Call in progress.
Line key lamp lights green. →
2.
Press Transfer key.
You will receive a special dial tone.
Calling party is placed on hold.
0:00:05
11:00 AM SUN 1 JUN 2014
MIC Mute
200
DDD
26-255XX