Station Hunting; Step Call - NEC UNIVERGE SV9300 User Manual

4.
The original call rings back.
Call Indicator Lamp flashes red.
Line key lamp flashes green. →
RECALL
11:00 AM SUN 1 JUN 2014
MIC DIR
5.
Lift the handset to restart a
conversation.
Line key lamp lights green. →
0:00:05
11:00 AM SUN 1 JUN 2014
MIC Mute

STATION HUNTING

When a busy terminal which is assigned Station
Hunting pilot number is called, this feature
permits the incoming call to be routed to another
terminal within the hunt group.
The terminal that is set the Station
Hunting feature and the pilot number
are set by system data setting at initial
installation. For details, please contact
the system administrator.
You cannot set Call Back, Call Waiting,
or Executive Override to the pilot
number of the hunt group.
1.
Lift the handset.
Line key lamp lights green. →
200
11:00 AM SUN 1 JUN 2014
Recall PICK
2.
Dial the desired number.
 If the pilot number is busy, the call is
26-255XX
HIST. >>>>
26-255XX
>>>>
78
FEATURE OPERATION
routed to another terminal within the
hunting group.
11:00 AM SUN 1 JUN 2014
Recall VOICE
3.
Start conversation with called party.
11:00 AM SUN 1 JUN 2014
MIC Mute

STEP CALL

This feature allows the terminal user, after calling
a busy terminal, to call an idle terminal by simply
dialing an additional digit.
The feature is set by system data
setting at initial installation. For details,
please contact the system
administrator.
1.
Lift the handset.
Line key lamp lights green. →
BUSY
11:00 AM SUN 1 JUN 2014
CB CW
2.
Dial the extension number.
You will receive a busy tone.
3.
Dial the last digit (0-9) of another
terminal.
Example: Dial "2".
11:00 AM SUN 1 JUN 2014
MIC Mute
201
CB >>>>
201
201
>>>>
202