Answer A Voice Call Handsfree; Automatic Intercom - NEC UNIVERGE SV9300 User Manual

4.
Dial .
The called party's extension will ring.
11:00 AM SUN 1 JUN 2014
R-TONE MIC
WHEN A CALLED TERMINAL
HAS BEEN SET TO TONE
FIRST
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
Line key lamp lights green. →
2.
Dial extension number.
The called party's extension will ring.
11:00 AM SUN 1 JUN 2014
R-TONE MIC
3.
Dial .
Wait for voice page alert tone.
VOICE CALL
11:00 AM SUN 1 JUN 2014
R-TONE MIC
4.
Start conversation with called party.
5.
The called party can reply.
ANSWER A VOICE CALL
HANDSFREE
This feature allows the terminal user to answer a
Voice Call without lifting the handset.
1.
You will receive an incoming Voice
Call.
200

AUTOMATIC INTERCOM

Automatic Intercom provides a path for voice
announcement calls between two terminals
using a Line key. Private conversations can be
held. The Busy/Idle status of the associated the
200
terminal is displayed on the Automatic Intercom
feature key LED.
TO INITIATE
200
85
FEATURE OPERATION
VOICE CALL
11:00 AM SUN 1 JUN 2014
R-TONE MIC
2.
Press Mic Key.
Mic key lamp lights red. →
3.
Respond to call handsfree.
11:00 AM SUN 1 JUN 2014
MIC Mute
The feature key is set by system data
setting at initial installation. For details,
please contact the system
administrator.
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2.
Press Automatic Intercom feature
key.
The called terminal receives a tone burst.
ICM
11:00 AM SUN 1 JUN 2014
MIC DIR
200
201
201
HIST. >>>>