To Set Connection Cycle; To Set Interrupt Ringing - NEC UNIVERGE SV9300 User Manual

TO SET CONNECTION CYCLE

Connection Cycle is the interval of time to initiate the connection to the smart device through Bluetooth.
1.
Refer to TO ENABLE/DISABLE AUTO CONNECTION
2.
Select " BCA Connection Settings".
Select one of the following operations.
 Press
,
 Press
.
3.
Select " Connection Cycle".
Select one of the following operations.
 Highlight an item by using
 Press
.
4.
Select the interval of time.
Select one of the following operations.
 Highlight an item by using
 Press
-

TO SET INTERRUPT RINGING

Using BCA option, it is possible to receive a call from communication server as an extension. Also it is
possible to receive a call to a smart device from mobile phone network. If you are in conversation with
one side, the interrupt ringing will alerts you when there is an incoming call from another side.
or Soft key (OK).
, and press
, and press
, and press or Soft key (OK).
131
APPENDIX E TO SET BCA OPTION UNIT
and display BCA option.
, or Soft key (OK).
, or Soft key (OK).