NEC UNIVERGE SV9300 User Manual page 33

SOFT KEY FEATURES
The following table describes features supported by Soft key. Also, service description is displayed on
the screen by key.
DISPLAY FEATURE
MIC Microphone On/Off
DIR Dial By Name
HIST. Call History
PICK Call Pickup - Group To answer the call directed to another station within Call Pickup -
FDA Call Forwarding - All
Calls
FDN Call Forwarding -
No Answer/Busy
DND Do Not Disturb
CB Call Back
CW Call Waiting - Set
VOICE Voice Call
CONF Conference -
Three/Four Party
Recall Recall
HOW TO USE SOFT KEYS
This section provides some sample operations of features using Soft keys.
SETTING DO NOT DISTURB
1.
Press Speaker key, press Soft key (>>>>) and press Soft key (DND).
"SET" is displayed.
To turn the microphone on and off for handsfree calling.
To search for a desired number in system directory by name.
To display outgoing and incoming call history. By using Call History
data, it is possible to make a call or register to the system directory.
Group.
Regardless of the busy or idle status, the incoming call is forwarded
to the other terminal.
The incoming call is forwarded to the other terminal when the
terminal is busy or no answer for predetermined time.
To restrict incoming calls to the terminal. It is possible to make a call
during Do Not Disturb is set.
To set automatic Call Back when a busy or no answer condition is
encountered. When the called terminal becomes available, the
terminal that set the Call Back is called.
When the caller encounters busy, the caller can request to answer
the call with burst tone. The called party can answer the call by
placing the original call on hold.
To alert incoming call by caller's own voice instead of ring tone.
During two parties connection, to add another party to make a
conference call.
To finish a call and hear the dial tone to make an another call.
200
11:00 AM SUN 1 JUN 2014
FDA FDN DND
SET
11:00 AM SUN 1 JUN 2014
25
DESCRIPTION
>>>>
INTRODUCTION