Last Number Redial; One-Touch Speed Calling Keys - NEC Univerge SV9300 Series User Manual

LAST NUMBER REDIAL

It is possible to search and redial the phone
number up to 60 calls previously dialed.
1. Press or Soft key (OG) after press
Soft key (HIST.) .
Speaker key lamp lights red. →
Line key lamp lights green. →
11 MAY 4:26
<<<< Redial
2. Press Soft key (￪Prev) or Soft key
(￬Next) to find desired number and
press .
The number on LCD is automatically redialed.
4:26 PM MON 11 MAY 2015
Recall VOICE
3. When party has answered, lift the
handset.
Speaker key lamp goes off. →
0:00:05
4:26 PM MON 11 MAY 2015
MIC Mute
JOHN SMITH
81XXXXXXXXXX
↑Prev ↓Next
81XXXXXXXXXX
CB >>>>
26-255XX
ONE-TOUCH SPEED
CALLING KEYS
This feature allows a terminal user to dial
frequently-called numbers by pressing a One-
touch key assigned for Station Speed Dialing.
Up to 32 digits can be registered for each dial
number.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
TO PROGRAM
Following explains how to register phone number
to a One-touch Speed Calling key.
1. Press Feature key.
Feature key lamp lights red. →
2. Press One-touch Speed Calling key.
Feature key lamp flashes red. →
Speaker key lamp lights red. →
3. Dial a desired number.
4:26 PM MON 11 MAY 2015
Recall
4. Press Feature key.
Feature key lamp goes off. →
Speaker key lamp goes off. →
SET
4:26 PM MON 11 MAY 2015
MIC
If you dial a wrong number, you will need to
start again from the beginning.
To register a pause, press
digits. The pause can not be registered as a
first digit.
61
FEATURE OPERATION
81XXXXXXXXXX
PICK >>>>
DIR HIST. >>>>
between any