Timed Reminder; Privacy Release - NEC Univerge SV9300 Series User Manual

TIMED REMINDER

This feature allows the system to be programmed
to automatically call terminals at specified times.
Upon answering, the terminal is connected to a
recorded announcement or music source.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator.
TO SET
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Set Timed Reminder.
Dial Timed Reminder feature access code or
press Timed Reminder feature key.
You will receive a feature dial tone.
4:26 PM MON 11 MAY 2015
Recall PICK
3. Dial the desired reminder time in
military format.
You will receive service set tone.
SET
4:26 PM MON 11 MAY 2015
4. Press Speaker key.
Speaker key lamp goes off. →

PRIVACY RELEASE

>>>>
0900
85
FEATURE OPERATION
A terminal is engaged in a conversation, and
allows another terminal to enter the call in
progress.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator.
1. Press Soft key (CONF) or
Conference feature key.
Line key lamp lights green. →
4:26 PM MON 11 MAY 2015
MIC CONF
2. Another terminal with the same line
appearance presses that Line key.
CONF 201
MIC Mute
3. A three-way conference is
established.
CONF 201
4:26 PM MON 11 MAY 2015
MIC Mute
201
Recall
301
Mary
301