Timed Queuing (Outside Line Only) - NEC Univerge SV9300 Series User Manual

3. Press Call Back feature key.
You will receive a service set tone.
Call Back feature key lamp goes off. →
CANCEL
4:26 PM MON 11 MAY 2015
4. Press Speaker key.
Speaker key lamp goes off. →
Line key lamp goes off. →
TIMED QUEUING (OUTSIDE
LINE ONLY)
When a user originates an outgoing trunk call and
the called party is busy or does not answer, the
caller can set the Timed Queuing. When this
feature is set, the trunk seizure is repeated and the
number is dialed again after a predetermined time
interval.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
4:26 PM MON 11 MAY 2015
Recall
2. Dial Outside Line access code.
4:26 PM MON 11 MAY 2015
Recall
3. Dial desired number.
You will receive a busy tone or a ring no
answer from distant end.
BUSY
4:26 PM MON 11 MAY 2015
CB
4. Press Call Back feature key.
Line key lamp flashes green. →
5. Leave speaker on.
The desired number is automatically redialed.
6. Start conversation with called party.
Busy tone is sent to the calling party when
the call is made to the extension that is in
Timed Queue mode.
72
FEATURE OPERATION
200
PICK >>>>
8
PICK >>>>
81XXXXXXXXXX