Outgoing Trunk Queuing; Off-Hook Trunk Queuing; Executive Override - NEC DT830 Series User Manual

OUTGOING TRUNK QUEUING

DT830 DT430/410
If Trunk Is Busy
STEP 1: Receive Trunk Busy indication. Press CALL
BACK. Call is placed in queue for next avail-
able trunk.
STEP 2: When trunk is available, setting station is
alerted by ringing and flashing red LED.
Speaker
STEP 3: Press
heard or number is automatically dialed if
Least Cost Routing is provided.
OG-Q SET
1:25 PM

OFF-HOOK TRUNK QUEUING

DT830 DT430/410
Speaker
STEP 1: Press
STEP 2: Dial desired telephone number. Encounter a
trunk busy condition.
STEP 3: Station user receives service set tone and
leaves speaker on.
STEP 4: The desired number is automatically dialed
when a trunk becomes available.
key or lift handset. Dial tone is
MON 22 SEP 2014
key, receive dial tone.

EXECUTIVE OVERRIDE

DT830 DT430/410
If Called Station Is Busy
STEP 1: Press OVERRIDE.
STEP 2: Interrupted parties receive warning tone.
OVERRIDE
1:25 PM
STEP 3: Three-way conference is initiated.
CONF
1:25 PM
Note: The Conf key is accommodated on only DTZ-2E-
3 and DTZ-6DE-3.
Using Soft Key
STEP 1: Press Exe-Over soft key.
STEP 2: Interrupted parties receive warning tone and
three-way conference is initiated.
OVERRIDE
1:25 PM
Mic
144
Overridden station
2001
MON 22 SEP 2014
MON 22 SEP 2014
2001
MON 22 SEP 2014
>>>