NEC DT830 Series User Manual page 85

STEP 21:Press BK soft key once to delete the default
file name and then enter a new file name by
using the digit keys.
Note:
For details on character entry method, see
TO INPUT CHARACTERS
Operation.
Note: A maximum of 20 characters ("0-9", "A-Z", "a-z",
"*", "#", ".", "-" or "_") can be entered as a file
name.
Note:
To delete an entered character, press BK soft
key.
STEP 22:Press or Exec soft key to start the down-
loading process. While downloading a file,
the LCD displays "Downloading..." first and
then "Saving...".
Note: Be sure not to turn OFF the DT830 Series while
"Saving..." is displayed on the LCD.
HOW
in chapter 4 Basic
77
STEP 23:After the downloading process is complete,
the display changes as follows:
Download Complete!
The display goes back to the Download
Files screen by Exit soft key.
Note:
When the downloading process ends in failure,
"Downloading Failed!" is displayed on the LCD.
Check to see the following and then retry.
Check Points
Download file is not
placed in the specified
directory.
A different file name is
specified between
DT830 Series and FTP/
TFTP server.
Incorrect IP address of
FTP/TFTP server has
been entered from the
telephone.
The power to FTP/
TFTP server or network
equipment is OFF.
LAN cable is
disconnected.
Exit
Actions
Place the download file in the
specified directory.
Set the same file name from
both DT830 Series and FTP/
TFTP server.
Set the proper IP address of
FTP/TFTP server.
Turn on the power.
Reconnect the cable
securely.