NEC DT830 Series User Manual page 50

1
STEP 3: Select Incoming Call.
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
1
• Press key.
[User Setting]
1
Incoming Call
2 Talk
3
Display
4 Change Password
5 Security
6
Peripherals
Usability
7

3
STEP 4: Select Headset Ring.
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
3
• Press key.
[Incoming Call]
1 Ring Volume
2
Offhook Ring
3
Headset Ring
4 Ring Tone
5
Illumination
6
Headset Ring Volume

, and then press
Back OK
, and then press
Back OK
STEP 5: To disable/enable the ringing of headset, se-
,
1
lect
Select an item by one of the following operations.
• Highlight an item by using
or OK soft key.
• Press
key.
[Headset Ring]
1
2
Note:
Default setting is 1 Disable.
Note: The enabled item is highlighted.
,
42
2
Disable or Enable.
, and then press
1 or 2 key, and then press
Disable
Enable

Back OK
or OK soft