1.
No icons are displayed.
* You can register name on each One-Touch
Speed Dial key. For the procedures, see
ISTER NAME ON ONE-TOUCH SPEED CALLING
KEY.
When any features using feature access code
are assigned.
■
CF-AllCalls
Black square icons are displayed.
* You can register name on each One-Touch
Speed Dial key. For the procedures, see
ISTER NAME ON ONE-TOUCH SPEED CALLING
KEY.
(e)Scroll Key
DTZ-8LD-3, ITZ-8LD-3, ITZ-8LDG-3
This key is used to turn over the page of DESI-less
screen.
Note:
The following key operations are not available
while DESI-less screen is displayed.
- Soft Key
- Help Key
- Exit Key
-
Right-cursor key and
TO REG-
TO REG-
Left-cursor key
24
CONDITIONS FOR DT830 SERIES
Please note that following terminal settings (by Feature
Key + Digit Key) cannot be used for DT830 Series.
• Feature+0 =Side Tone On/Off (for handset)
For the settings, contact the Administrator.
* You can confirm the settings in "Audio&Visual Set-
tings" "Side Tone Volume" of Online Monitoring.
• Feature+2 =Adjusts handset receiver volume
For the settings, contact the Administrator.
* You can confirm the settings in "Audio&Visual Set-
tings" "Audio Settings" "Receive Bias"/"Re-
ceive Gain" of Online Monitoring.
• Feature+3 =Selects ringer tone
For the settings, contact the Administrator.
* You can confirm the settings in "Audio&Visual Set-
tings" "Audio Settings" "Ring Settings" of On-
line Monitoring.
• Feature+4 =Adjusts transmission/receiving volume
For the settings, contact the Administrator.
* You can confirm the settings in "Audio&Visual Set-
tings" "Audio Settings" "Receive Bias"/"Re-
ceive Gain"/"Send Gain" of Online Monitoring.
• Feature+5 =Activates hands-free operation
Not Available
• Feature+6 =Deactivates hands-free operation
Not Available