Call Forwarding - All Calls - NEC DT830 Series User Manual

CALL FORWARDING - ALL CALLS

DT830 DT430/410
To Set
Speaker
STEP 1: Press
STEP 2: If setting for another station, press MULTI-
LINE APPEARANCE.
STEP 3: Press FWD or dial "Call Forwarding – All
Calls" access code. Receive special dial
tone.
STEP 4: Dial destination station or external telephone
number. Receive service set tone.
STEP 5: FWD LED lights (at your station or at the DT
Series of the multiline station you are setting).
Speaker
STEP 6: Press
is set.
FORWARD SET
1:25 PM
Using Soft Key
STEP 1: Press CF-All soft key. Receive special tone.
STEP 2: Dial destination; wait for service set tone.
STEP 3: "FORWARD SET" is displayed, call forward-
key. Receive dial tone.
key. Call Forwarding – All Calls
Forwarding
station
2000
MON 22 SEP 2014
ing for all calls is set.
FORWARD SET
1:25 PM
Mic
To Verify (Only For Terminal With LCD)
STEP 1: Press FWD.
STEP 2: Display indicates the station number calls are
forwarded to.
FORWARD
1:25 PM
Note: With soft key operation, CF-Busy flashes on the
display.
147
MON 22 SEP 2014
>>>
Forwarding
station
2000
MON 22 SEP 2014