NEC DT830 Series User Manual page 90

Note: For details on character entry method, see
TO INPUT CHARACTERS
Operation.
Note:
A maximum of 20 characters ("0-9", "A-Z", "a-z",
"*", "#", ".", "-" or "_") can be entered as a file
name.
Note: To delete an entered character, press BK soft
key.
The backup file can be encrypted pressing Enc soft
key. When the file is encrypted, the extension of the file
name will be "tgz.ef".
Note:
Enc key is available for SV9500 V1 or later.
[Data Backup]
Input a folder name.
PersonalData.tgz.ef
BK NoEnc
Note:
If you change the encrypted file into the unen-
crypted file, press NoEnc soft key.
STEP 19:Press or Exec soft key to start the data
backup. While making a backup copy, the
LCD displays "Uploading..." first and then
"Saving...".
Note:
Be sure not to turn OFF the DT830 Series while
"Saving..." is displayed on the LCD.
HOW
in chapter 4 Basic
A
Cancel Exec
STEP 20:After the data backup is complete, the display
changes as follows:
Upload Complete!
The display goes back to the Backup/
Restore screen by Exit soft key.
Note:
When the data backup ends in failure, "Upload
Failed!" is displayed on the LCD. Check to see
the following and then make a retry.
Check Points
A different file name is
specified between
DT830 Series and FTP/
TFTP server.
Incorrect IP address of
FTP/TFTP server has
been entered from the
telephone.
The power to FTP/
TFTP server or network
equipment is OFF.
LAN cable is
disconnected.
82
Exit
Actions
Set the same file name
from both DT830 Series
and FTP/TFTP server.
Set the proper IP address
of FTP/TFTP server.
Turn on the power.
Reconnect the cable
securely.