Conference; To Establish A Broker Call; To Answer A Camped-On Call - NEC DT830 Series User Manual

CONFERENCE

STEP 1: With a call in progress, press
dial desired number.
STEP 2: After call is answered, press Conf. soft key.
Three-way conference is established.
CONF
1:25 PM
Mic
STEP 3: If one party hang up, other two remain con-
nected. Conf LED goes out.
Note:
The Conf key is accommodated on only DTZ-2E-
3, DTZ-6DE-3. If using the terminals without
Conf key, use a soft key or programmable fea-
ture key to which conference feature has been
assigned.

TO ESTABLISH A BROKER CALL

DT830 DT430/410
STEP 1: While engaged in a call and wishing to con-
sult a third party, press
automatically placed on hold.
STEP 2: Dial desired party to consult.
STEP 3: Press
Transfer
Third party is automatically placed on hold.
STEP 4: By repeating these steps, it is possible to al-
ternate between calls.
DT830 DT430/410
Transfer
MON 22 SEP 2014
>>>
key. Caller is
Transfer
key to return to original caller.
Note:
key and

TO ANSWER A CAMPED-ON CALL

DT830 DT430/410
STEP 1: While engaged in a call, receive the camp-on
STEP 2: Press
STEP 3: Connection to camped-on call is established.
STEP 4: Press
STEP 5: By repeating these steps, it is possible to al-
139
The display indicates connected station or trunk
at any given time.
indication (one short tone burst). LED of
key flashes.
Answer
key. Call in progress is placed
Answer
on hold.
Answer key to return to original call.
Camped-on call is placed on hold.
ternate between calls. Display indicates con-
nected station or trunk at any given time.
Trunk
type
CAMP ON DDD
1:25 PM MON 22 SEP 2014
Trunk
number
3